產品列表PRODUCTS LIST
如下為我司愛澤工業IZE_Industries本月到貨RESIDEO相關產品，歡迎致電索取樣本資料和產品信息。
RESIDEO減壓閥D06F-1A
RESIDEO減壓閥D06FN-12B
RESIDEO減壓閥D22-2A
RESIDEO減壓閥D15S-80A
RESIDEO減壓閥D06F系列介紹
依據 EN 806-2 標準，此類減壓閥可保護家用供水系統免受過高供水壓力的影響；在規格允許范圍內，也可用于工業或商業領域。安裝減壓閥可避免因壓力過高造成的損壞，并降低用水量。
即使入口壓力大幅波動，設定壓力仍能保持恒定。降低并穩定運行壓力，可最大限度地減少管路系統中的水流噪音。
• 入口壓力平衡——出口壓力不受入口壓力波動影響
• 尺寸在1 1/4 in及以下的型號，經LGA認證為低噪音（Group 1），無使用限制
• 閥芯采用優質合成材料制成，可更換
• 亦提供不帶連接接頭的版本
• 符合BSEN 1567標準
• 所有材料均符合UBA要求
• 所有材料均獲ACS認證
According EN 806-2 pressure reducing valves of this type protect household water installations against excessive pressure from the supply. They can also be used for industrial or commercial applications within the range of their specification. By installing a pressure reducing valve, pressurisation damage is avoided and water consumption is reduced.
The set pressure is also maintained constant, even when there is wide inlet pressure fluctuation. Reduction of the operating pressure and maintaining it at a constant level minimizes flow noise in the installation.
• Inlet pressure balancing - no influence on outlet pressure by fluctuating inlet pressure
• Up to size 1 1/4 in approved by LGA for low noise, Group 1 without limitations
• The valve insert is of high quality synthetic material and can be fully exchanged
• Also available without fittings
• Conforms to BSEN 1567
• All materials are UBA conform
• All materials are ACS approved
RESIDEO減壓閥D06FN系列介紹
依據 EN 806-2 標準，此類減壓閥可保護家用供水系統免受過高供水壓力的影響；在規格允許范圍內，也可用于工業或商業領域。安裝減壓閥可避免因壓力過高造成的損壞，并降低用水量。即使入口壓力大幅波動，設定壓力仍能保持恒定。降低并穩定運行壓力，可最大限度地減少管路系統中的水流噪音。
• 入口壓力平衡——出口壓力不受入口壓力波動影響
• 規格在 1 1/4" 及以下的產品已獲 LGA 認證，Group 1（低噪音）標準，無使用限制
• 閥芯采用優質合成材料制成，可更換
• 通過旋轉調節旋鈕設定出口壓力
• 設定壓力值直接顯示在刻度盤上
• 調節彈簧不與飲用水接觸
• 內置精細過濾器
• 易于加裝改造，可轉換為帶反沖洗功能的過濾組合閥
• 可加裝入口止回閥
• 亦提供不帶連接接頭的版本
• 所有材料均符合UBA要求
• 所有材料均獲ACS認證
According EN 806-2 pressure reducing valves of this type protect household water installations against excessive pressure from the supply. They can also be used for industrial or commercial applications within the range of their specification. By installing a pressure reducing valve, pressurisation damage is avoided and water consumption is reduced. The set pressure is also maintained constant, even when there is wide inlet pressure fluctuation. Reduction of the operating pressure and maintaining it at a constant level minimizes flow noise in the installation.
• Inlet pressure balancing - no influence on outlet pressure by fluctuating inlet pressure
• Up to size 1 1/4" approved by LGA for low noise, Group 1 without limitations
• The valve insert is of high quality synthetic material and can be fully exchanged
• The outlet pressure is set by turning the adjustment knob
• The set pressure is directly indicated on the set point scale
• The adjustment spring is not in contact with the drinking water
• Integral fine filter
• Easily retrofittable to convert valve to a reverse-rinsing filter combination
• Can be retrofitted with an inlet check valve
• Also available without fittings
• All materials are UBA conform
• All materials are ACS approved
RESIDEO減壓閥D22系列介紹
此類減壓閥可保護系統免受供水側過高壓力的影響。在規格允許的范圍內，它們適用于工業或商業應用。若減壓閥進水側出現過高壓力且下游系統需要保護，則應加裝安全閥。
• 進口壓力平衡——出口壓力不受進口壓力波動影響
• 安裝長度短
• 配備帶旋鈕的壓力調節螺桿
• 調節彈簧不與介質接觸
• 內螺紋連接
• 結構緊湊
• 重量輕
Pressure reducing valves of this type protect installations against excessive pressure from the supply. They can be used for industrial or commercial applications within the range of their specification. Should excessive pressure occur on the outside of the pressure reducing valve and the downstream system needs to be protected, a safety valve should be installed.
• Inlet pressure balancing - no influence on outlet pressure by fluctuating inlet pressure
• Short installed length
• Screw with knob for setting pressure
• The adjustment spring is not in contact with the medium
• Internal threaded connection
• Compact construction
• Light weight
RESIDEO減壓閥D15S系列介紹
依據 EN 806-2 標準，此類減壓閥可保護家用供水系統免受過高供水壓力的影響；在規格允許范圍內，也可用于工業或商業領域。安裝減壓閥可避免因壓力過高造成的損壞，并降低用水量。即使在入口壓力大幅波動的情況下，設定壓力仍能保持恒定。降低并穩定運行壓力，可最大限度地減少管路系統中的水流噪音。
• 無鉛：所有材料的鉛（Pb）含量均低于0.1%
• 入口壓力平衡設計——出口壓力不受入口壓力波動影響
• 采用閥芯設計，便于安裝與維護
• 僅需三種規格的閥芯即可覆蓋所有公稱通徑，有效優化庫存管理
• 不銹鋼閥芯與 PA 涂層確保了耐腐蝕性能
• 調節彈簧不與飲用水接觸
• 配備入口及出口壓力表
• 功能與性能已通過加速壽命測試驗證（測試循環次數超過400,000次；EN 1567標準要求為200,000次）
• 符合BSEN 1567標準
• 所有材料均符合UBA要求
• 獲ACS認證
According EN 806-2 pressure reducing valves of this type protect household water installations against excessive pressure from the supply. They can also be used for industrial or commercial applications within the range of their specification. By installing a pressure reducing valve, pressurisation damage is avoided and water consumption is reduced. The set pressure is also maintained constant, even when there is wide inlet pressure fluctuation. Reduction of the operating pressure and maintaining it at a constant level minimizes flow noise in the installation.
• LEAD FREE: Pb content of all materials less than 0.1 %
• Inlet pressure balancing - no influence on outlet pressure by fluctuating inlet pressure
• Patented cartridge solution for easy assembly and maintenance
• Three cartridge inserts for all nominal widths make warehousing efficient
• High corrosion resistance due to stainless steel cartridge and PA coating
• The adjustment spring is not in contact with the drinking water
• With inlet and outlet pressure gauge
• Functionality and performance have been confirmed by an accelerated life test with over 400,000 cycles (requirement acc. to EN 1567: 200,000 cycles)
• Conforms to BSEN 1567
• All materials are UBA conform
• ACS certified
RESIDEO減壓閥常用型號：
RESIDEO D06F-1/2A
RESIDEO D06F-1/2B
RESIDEO D06F-1/2E
RESIDEO D06F-11/2B
RESIDEO D06F-11/2E
RESIDEO D06F-11/4A
RESIDEO D06F-11/4B
RESIDEO D06F-11/4E
RESIDEO D06F-1A
RESIDEO D06F-1B
RESIDEO D06F-1E
RESIDEO D06F-1LFA
RESIDEO D06F-2A
RESIDEO D06F-2B
RESIDEO D06F-2E
RESIDEO D06F-3/4A
RESIDEO D06F-3/4B
RESIDEO D06F-3/4E
RESIDEO D06FH/R1/2
RESIDEO D06FH-1/2B
RESIDEO D06FH-1/2BGB
RESIDEO D06FH-11/2B
RESIDEO D06FH-11/2BGB
RESIDEO D06FH-11/4B
RESIDEO D06FH-11/4BGB
RESIDEO D06FH-1B
RESIDEO D06FH-1BGB
RESIDEO D06FH-2B
RESIDEO D06FH-2BGB
RESIDEO D06FH-3/4B
RESIDEO D06FH-3/4BGB
RESIDEO D06FI-1A
RESIDEO D06FI-2B
RESIDEO D06FN-1/2B
RESIDEO D06FN-1/2BGB
RESIDEO D06FN-11/2B
RESIDEO D06FN-11/2BGB
RESIDEO D06FN-11/4B
RESIDEO D06FN-11/4BGB
RESIDEO D06FN-1B
RESIDEO D06FN-1BGB
RESIDEO D06FN-2B
RESIDEO D06FN-2BGB
RESIDEO D06FN-3/4B
RESIDEO D06FN-3/4BGB
RESIDEO D15S-100A
RESIDEO D15S-150A
RESIDEO D15S-200A
RESIDEO D15S-50A
RESIDEO D15S-65A
RESIDEO D15S-80A
RESIDEO D22-1/2A
RESIDEO D22-1/4A
RESIDEO D22-11/2A
RESIDEO D22-11/4A
RESIDEO D22-1A
RESIDEO D22-2A
RESIDEO D22-3/4A
RESIDEO D22-3/8A
RESIDEO Z11AS-1A
如果您需要完整的RESIDEO的相關技術咨詢，請隨時致電愛澤工業，或者訪問網站,我們將盡全力解決您的問題。
If you have any question for RESIDEO，Please feel free to communicate with us and we will do our best to solve your problem.
